Freight Shipping Quote Checklist: What to Have Ready
The details carriers price on, in one list, so the quote you get is the bill you pay.
12 min read · Updated Oct 2026

You ship pallets every week, or you're about to start. You ask for a freight shipping quote, get a number, and then the invoice comes in higher: a liftgate fee, a reweigh, a different freight class. Most of those surprises come from details that were missing or wrong when the quote was requested.
This checklist covers what carriers and logistics providers price on, explained in plain language: ZIP codes, freight type, pallets and weight, pickup frequency, dock and liftgate needs, and the extra fees that can recur on every load. Fill it in once, and you can reuse it for every lane you ship.
Ship freight anywhere in the U.S.? Send us your lane details.
Key takeaways
- An accurate quote needs exact ZIP codes, a clear description of the freight, real measured dimensions and weight, and how often you ship.
- Freight class and extra service fees (called accessorials) are the two most common reasons a final bill differs from the quote.
- Ask what's included, how loss or damage claims work, and whether you're dealing with the carrier or a broker before you book.
On this page
- Why freight quotes change after pickup
- 1. Origin and destination: exact ZIP codes and location type
- 2. Freight type: what you're shipping
- 3. Freight class, explained simply
- 4. Pallets, dimensions, and weight
- 5. Pickup frequency and timing
- 6. Dock and liftgate needs
- 7. Recurring fees: accessorials, in plain language
- 8. Freight value, liability, and claims
- 9. Know who you're dealing with
- 10. Have your bill of lading details ready
- A quote request you can copy and paste
- How to compare freight quotes fairly
- Your one-page freight quote checklist
- Send us your lane
Why freight quotes change after pickup
A quote is only as good as the information behind it. Carriers check what actually shows up at the dock.
Less-than-truckload (LTL) freight, meaning shipments that share a trailer with other customers' freight, is priced in part by freight class. The National Motor Freight Traffic Association (NMFTA), which publishes the National Motor Freight Classification (NMFC), warns that misclassified freight can lead to reclassification charges, delays, or damage. The same page tells shippers to always use accurate measurements for weight and dimensions, never estimates.
Extra services also add up. Under federal rules, a for-hire motor carrier's freight bill must show the total charges due, including the nature and amount of any charges for special services. If a liftgate or an appointment wasn't in your quote request, it can still show up on the bill.
The fix is simple: give complete, accurate details up front.
1. Origin and destination: exact ZIP codes and location type
Distance and location drive a large part of the price. "Chicago to Dallas" is not enough.
What to have ready
- Pickup ZIP code (origin) and delivery ZIP code (destination).
- Full street addresses, if you have them. Some areas cost more to serve than others in the same city.
- Location type at each end: a business with a loading dock, a business without a dock, a residence, or a limited-access site.
- Open hours for shipping and receiving at both ends.
- Any delivery restrictions, such as no trucks before a certain time, a gated entrance, or a long driveway.
What "limited access" means
A limited-access location is a place that's harder for a truck to reach or enter. Examples can include schools, construction sites, military bases, self-storage units, farms, churches, and some secured buildings. These can carry extra charges, so say so up front.
2. Freight type: what you're shipping
Carriers need to know what the freight is, not just how big it is. The description affects the freight class, how it's handled, and whether special paperwork is required.
What to have ready
- A plain description, such as "boxed auto parts on pallets" or "bagged dry pet food," rather than "merchandise."
- The NMFC item number, if you know it. If you don't, a good description helps the person quoting find it.
- Packaging: pallets, crates, boxes, drums, rolls, or loose pieces.
- Fragile or high-value items.
- Temperature needs, such as keep from freezing or refrigerated.
- Whether the freight can be stacked, or whether nothing can go on top of it.
- Hazardous materials: yes or no.
If your freight is hazardous
Hazardous materials (often called hazmat) have their own federal paperwork rules. Under 49 CFR Part 172, Subpart C, each person who offers a hazardous material for transportation must describe it on the shipping paper in the required way. That description includes the identification number, the hazard class or division, and the packing group where one applies. If you ship anything hazardous, say so in your quote request and have the details ready. Not every carrier handles every type of hazmat.
3. Freight class, explained simply
If you ship LTL, freight class is one of the biggest factors in what you pay.
What freight class is
The NMFTA describes freight class as the common language carriers and shippers use to agree on the effort it takes to move a load. According to the NMFTA, each product or commodity gets an NMFC freight class from 50 to 500, based on four characteristics:
- Density: how heavy the freight is for the space it takes up.
- Handling: how easy it is to move across a dock and into or out of a trailer.
- Stowability: how well it fits into a trailer with other freight.
- Liability: how likely it is to be damaged or to damage other freight.
The NMFTA explains that the denser and easier to move the freight is, the lower the class and the lower the cost. Bulkier, fragile, or hazardous items have higher classes.
How to figure density
Density is weight divided by volume. Here's the math for one pallet:
1. Measure length, width, and height in inches, including the pallet and any overhang.
2. Multiply them together, then divide by 1,728 to get cubic feet (there are 1,728 cubic inches in a cubic foot).
3. Divide the total weight in pounds by the cubic feet. The result is pounds per cubic foot.
For example, a pallet measuring 48 x 40 x 50 inches is 96,000 cubic inches, or about 55.6 cubic feet. If it weighs 600 pounds, its density is about 10.8 pounds per cubic foot. This is just a worked example of the math, not a guide to what class that freight would be.
Density is only one of the four factors, and the correct class depends on the NMFC item for your product. NMFTA's ClassIT+ tool helps find the correct NMFC item number, calculate density, and confirm freight class. If you're not sure of your class, give the person quoting your measured dimensions, weight, and a clear description, and ask them to confirm it.
4. Pallets, dimensions, and weight
This is the section where estimates cause the most trouble.
What to have ready
- Number of pallets (or pieces) per shipment.
- Dimensions of each pallet in inches: length, width, and height, measured with the freight on it.
- Weight of each pallet, including the pallet itself and packaging.
- Total shipment weight.
- Stackable or not stackable.
- Any oversized or odd-shaped pieces.
Use a scale if you can. A carrier may reweigh or re-measure freight at its terminal, and the bill will follow what it finds.
LTL or full truckload?
If your shipments are small, you'll likely ship LTL, sharing trailer space and paying for the space and class your freight uses. If you fill most or all of a trailer, a full truckload (FTL) quote, where you pay for the whole truck, may make more sense. Ask for both if you're near the line.
There are also legal weight limits. The Federal Highway Administration says the federal maximum on the Interstate Highway System is 80,000 pounds gross vehicle weight, with limits of 20,000 pounds on a single axle and 34,000 pounds on a tandem axle. That gross weight includes the truck and trailer, not just your freight. Very heavy loads may need special planning, so mention them.
Have your lane details ready? Tell us your ZIP codes, freight, pallets, weight, and how often you ship, and we'll help identify the right next step.
5. Pickup frequency and timing
A single shipment and a weekly lane are priced differently. Recurring freight on the same route (a lane) is easier for carriers to plan around.
What to have ready
- One-time or recurring. If recurring, how often: daily, weekly, or monthly.
- Typical shipments per month on this lane.
- Ready date and time: when the freight will be packed and ready.
- Required delivery date, and whether it's a firm deadline or a target.
- Seasonal swings, such as heavier volume before holidays.
- Other lanes you ship, if you want them quoted together.
Why long trips take days
Transit time isn't just about distance. Federal hours-of-service rules limit how long a truck driver can drive. Under 49 CFR 395.3, a property-carrying driver must first take 10 consecutive hours off duty, may drive a total of 11 hours, and may not drive after the 14th consecutive hour after coming on duty. LTL freight also moves through terminals. If your deadline is tight, say so and ask what service level meets it.
6. Dock and liftgate needs
How freight gets on and off the truck matters at both ends of the trip.
Key terms
- Loading dock: a raised platform at truck height, so freight can be rolled straight on or off with a pallet jack or forklift.
- Liftgate: a powered platform on the back of the truck that lowers freight to the ground. You need one if there's no dock and no forklift.
- Inside delivery: the driver brings freight past the door, not just to the back of the truck.
- Appointment or call-ahead: the carrier must schedule delivery or call before arriving.
What to have ready
- Dock at pickup? Yes or no.
- Dock at delivery? Yes or no.
- Forklift or pallet jack on site at each end.
- Liftgate needed at pickup, delivery, or both.
- Inside delivery needed.
- Appointment or call-ahead required by the receiver.
If you're not sure about the delivery end, ask your customer before you request a quote. A liftgate that wasn't ordered can mean a failed delivery, a second trip, and a second set of charges.
7. Recurring fees: accessorials, in plain language
An accessorial is a charge for anything beyond basic pickup and delivery at a dock during business hours. These charges are where quotes and bills most often drift apart, and on a recurring lane they repeat on every shipment.
Common accessorials to ask about
- Liftgate at pickup or delivery.
- Residential pickup or delivery.
- Limited-access location.
- Inside pickup or delivery.
- Appointment or notify-before-delivery.
- Detention: a charge when the truck waits beyond an agreed time to load or unload.
- Redelivery: a second attempt after a failed delivery.
- Reweigh or reclassification: when the carrier finds a different weight or class than you listed.
- Fuel surcharge: an added charge that changes with fuel prices.
- Hazmat handling, if it applies.
Ask for the rules in writing
Federal law gives you a right to see the basis for your rate. Under 49 U.S.C. 14706, a motor carrier that isn't required to file its tariff must give the shipper, on request, a written or electronic copy of the rate, classification, rules, and practices the rate is based on. A tariff is the carrier's published list of rates and rules. If a fee isn't clear, ask for the rule behind it.
8. Freight value, liability, and claims
Know the rules on loss and damage before you book, not after.
What federal law says
Under 49 U.S.C. 14706, a carrier must issue a receipt or bill of lading, and carriers covered by the law are liable for the actual loss or injury to the property. The same law lets carriers set rates that limit liability to a value declared by the shipper in writing or agreed in writing, if that value is reasonable. It also says a carrier can't give you less than 9 months to file a claim, or less than 2 years to bring a lawsuit after a claim is denied in writing.
What to have ready
- The value of a typical shipment.
- Whether you want extra coverage for high-value freight.
- A question for the person quoting: what is the carrier's liability limit on this shipment, and how do I file a claim?
9. Know who you're dealing with
Freight can be quoted by a carrier, which owns the trucks, or by a broker, which arranges the move with a carrier.
Federal rules define a broker as a person who, for compensation, arranges or offers to arrange the transportation of property by an authorized motor carrier. The same rules say a broker may not represent its operations as a carrier's, and its advertising must show that it is a broker.
You can look up a carrier or broker yourself. The Federal Motor Carrier Safety Administration's free SAFER Company Snapshot lets you search by USDOT number, MC number, or company name. It shows the company's identification, size, commodity information, and safety record.
- Ask whether the quote is from a carrier or a broker.
- Get the USDOT or MC number of the company that will move your freight.
- Look it up on SAFER.
10. Have your bill of lading details ready
The bill of lading is the receipt and contract that travels with your freight. Federal rules say a for-hire motor carrier's bill of lading must include the names of the shipper and receiver, the origin and destination points, the number of packages, a description of the freight, and its weight, volume, or measurement when that affects the rate. If you've filled in this checklist, you already have most of it.
A quote request you can copy and paste
Fill this in and send it with every quote request. You can paste it straight into the "What do you need?" box on our freight form.
Pickup ZIP / address: Pickup location type (dock / no dock / residence / limited access): Pickup hours: Delivery ZIP / address: Delivery location type (dock / no dock / residence / limited access): Delivery hours: What it is (plain description): NMFC item or freight class, if known: Packaging (pallets / crates / boxes / other): Number of pallets or pieces: Dimensions per pallet (L x W x H, inches): Weight per pallet and total (lbs): Stackable (yes / no): Hazardous materials (yes / no; if yes, ID number and class): Temperature needs: One-time or recurring; if recurring, how often: Ready date and required delivery date: Liftgate needed (pickup / delivery / both / none): Inside delivery or appointment needed: Typical shipment value: Current cost on this lane, if you have it:
How to compare freight quotes fairly
When you have more than one quote, make sure they're quoting the same thing.
- Same pickup and delivery details, including location type.
- Same freight class, weight, and dimensions.
- Same accessorials included, such as liftgate and appointment.
- Fuel surcharge included or listed separately.
- Transit time and service level.
- Liability limit and claims process.
- Carrier or broker, and the USDOT or MC number.
- How long the quote is valid.
A low quote that leaves out a liftgate or uses the wrong class can end up costing more than a complete one.
Your one-page freight quote checklist
- Exact origin and destination ZIP codes, with location type and hours
- Plain description of the freight, packaging, and NMFC item or class if known
- Hazmat yes or no, with details if yes
- Measured dimensions and weight per pallet, plus totals
- Stackable or not
- One-time or recurring, how often, ready date, and delivery deadline
- Dock, forklift, and liftgate needs at both ends
- Inside delivery or appointment needs
- List of accessorials included in the quote
- Shipment value, liability limit, and claims process
- Carrier or broker, with USDOT or MC number checked
Send us your lane
GROFINEX connects businesses that ship freight across the U.S. with an independent licensed freight broker partner. Send us one lane or several, with the details above, and we'll help identify the right next step for your shipping needs.
Get the right freight setup for your lanes. Share your ZIP codes, freight, and schedule in a short form.
Sources
- National Motor Freight Traffic Association, NMFC: What is Freight Class?. freight classes 50 to 500; density, handling, stowability, and liability; denser and easier to move means a lower class; misclassification can lead to reclassification charges, delays, or damage; use accurate measurements, never estimates; ClassIT+ tool.
- eCFR, 49 CFR Part 373, Receipts and Bills. required contents of a bill of lading (373.101); freight bills must show total charges, including charges for special services (373.103).
- Legal Information Institute, Cornell Law School, 49 U.S. Code 14706, Liability of carriers under receipts and bills of lading. carrier liability for actual loss or injury; liability limited to a declared or agreed value if reasonable; copy of rates, classification, and rules on request; minimum 9 months to file a claim and 2 years to sue.
- eCFR, 49 CFR Part 371, Brokers of Property. definition of a broker; a broker may not represent its operations as a carrier's, and its advertising must show broker status.
- Federal Motor Carrier Safety Administration, SAFER Company Snapshot. free search by USDOT number, MC number, or company name; snapshot of identification, size, commodity information, and safety record.
- Federal Highway Administration, Commercial Vehicle Size and Weight Program. federal Interstate limits of 80,000 pounds gross vehicle weight, 20,000 pounds single axle, 34,000 pounds tandem axle.
- eCFR, 49 CFR 395.3, Maximum driving time for property-carrying vehicles. 10 consecutive hours off duty, 11 hours of driving, 14-hour window.
- eCFR, 49 CFR Part 172, Subpart C, Shipping Papers. hazardous materials must be described on shipping papers, including identification number, hazard class or division, and packing group.
General information, not legal, tax, or financial advice.